Our Products
Kimwood Corporation concentrates primarily in the manufacture of equipment employed in the abrasive and knife finishing of lumber, and the abrasive sanding of particleboard, plywood, MDF board, OSB board used in the primary market of the woods products industry. Sales to the primary market are handled almost exclusively through direct contact with the customer while secondary market sales are also handled by direct contact and through several key dealers. Click the following link to check our "Equipment Currently in Stock".Sanders
Wide belt sanders continue to be Kimwood's primary proprietary product line with customers located worldwide. While the emphasis is on the building of new sanders, Kimwood also has a used sander trade-in and rebuild program. The rebuilding of an existing Kimwood sander is a natural for Kimwood. Not only did Kimwood manufacture the sander originally, but service records, parts sales records, original OEM specifications, tolerances and any upgrades made since the original shipment are on file to facilitate the process.
 Control Master |
 Crossbelt |
 Panel Master |
 Lumber Sander |
 American Series |
 Master Series |
 Smithway |
Roll Inventory Program
The Roll Inventory Program was introduced in September of 1999 when Kimwood began stocking rolls that were in the highest demand. Kimwood has now implemented a revised program that will increase the number and type of rolls held in inventory via component stocking rather than assembled rolls. Component stocking will allow more individual roll parts to be placed in inventory which are used on multiple roll assemblies. This will be advantageous and will increase our ability to meet the high demand rolls needed to help customers during downtime situations. Click "Roll Inventory Program" for more information. |
Hogs
 Kimwood Hog |
For the processing of wood waste Kimwood manufactures the Kimwood Hog which handles waste ranging from solid wood chunks to stringy bark in quantities ranging from 5 tons per hour to over 100 tons per hour. The patented Kimwood Hog is designed and built to process difficult materials with less power and low maintenance. |
Ferrari Resaws
 Single and Twin Band | Kimwood manufactures the Ferrari Resaw featuring a tilting table in Single, Twin and Triple band configurations. The Ferrari Resaw is available as a Standard or Heavy Duty machine with material capacities range from 1/4" wide x 1/4" thick up to 16" wide x 14" thick. |
Cylinders
Kimwood cylinders have been thoroughly tested on our own equipment before being considered for the open market. Cylinders built by Kimwood have withstood abuse and punishment when other cylinders have failed. Kimwood cylinders, built with only the highest quality materials on the market, are the muscles of most automated equipment.
 JIC (Joint Industrial Council) |
 PC (Pacific Coast) |
Stetson-Ross Planers Planers / Moulders Feed Tables / Lumber Accelerators |
Tri-State Moulders / Rip Saws / Resaws Re-Rip Saws / Cut-off Saws |
Kimwood Handling Equipment Gradelines / Feeders / Panel Turners |
Maintenance Assistance Tools Maintenance Tools |